Működési hibák

A közösségi honlap, a fórum, a levelezőlisták, a blogmotor és a Csillagváros egyéb funkcióival kapcsolatos észrevételek, hibák, kérdések fóruma.
Avatar
SzZoli
Hozzászólások: 1544
Csatlakozott: 2009.09.07. 10:41

Re: Működési hibák

Hozzászólás Szerző: SzZoli » 2012.03.06. 10:24

SzZoli írta:Sziasztok,
mindig "0 új üzenet" feliratot látok, csak emailből értesülök arról, ha valaki új pü-t küld nekem.


Sziasztok,
a helyzet régóta változatlan!

Egy új problémával is szembesültem: ha a menü alatti (0 új üzenet) - re kattintok, csak egypár régi, 2010-es üzenet jelenik meg, az új, amiről friss mail-értesítőt kaptam, nem! A mailben levő linkre kattintva tudom csak elérni, kerülő úton. Lehet, hogy én csinálok valamit rosszul, de úgy érzem, a Fórum üzenetkezelése valahogy nem straightforward...
lacus66
Hozzászólások: 193
Csatlakozott: 2010.10.20. 10:00

Re: Működési hibák

Hozzászólás Szerző: lacus66 » 2012.03.06. 17:11

Lehet, hogy az e-mail-es értesítők sem mennek ki minden esetben?

Az elmúlt 3 hétben 2 üzenetet is küldtem és egyikre sem kaptam választ...
balatonl
Hozzászólások: 197
Csatlakozott: 2009.09.06. 19:43

Re: Működési hibák

Hozzászólás Szerző: balatonl » 2012.03.06. 23:50

Sziasztok!

Elnézést kérek a válaszok elmaradásáért. Maximálisan egyetértek a reklamációkkal, azok javítása / a fejlesztések elvégzése indokolt lenne, azonban sajnos nincs erőforrás MCSE-berkekben a hibakezelésre / továbbfejlesztésre.

Várhatóan ez év végéig kiszervezzük az üzemeltetést és a fejlesztést, ez folyamatban van, addig sajnos csak a türelmeteket kérhetem.

Laci
Kérlek, a honlap használatával kapcsolatos új kérdés beküldése előtt először olvasd el az alábbiakat:
Avatar
Imre
Hozzászólások: 1799
Csatlakozott: 2010.12.29. 14:18

Re: Működési hibák

Hozzászólás Szerző: Imre » 2012.03.13. 18:37

Kedves László!
Az alábbi címet tettem be, de nem alakult linkké!

a www.radio.hu hangtárára mutat:

[url]http://hangtar.radio.hu/kossuth#!#2012-03-13[/url]

[url]hangtar.radio.hu/kossuth#!#2012-03-13[/url]

Szerintem ez hiba, ugyanis NEM csak a www kezdetű lehet url cím!
Üdv. Imre
Ne azt sorold, hogy mit, miért nem lehet, hanem főként azt, hogy mit hogyan kell tenni a cél érdekében!
lizzike
Hozzászólások: 39
Csatlakozott: 2012.02.26. 11:44

Re: Működési hibák

Hozzászólás Szerző: lizzike » 2012.03.20. 18:07

Sziasztok!

Mivel a másik topic le lett zárva, ezért ide írok! Már írtam két emailt nektek, de nem jött válasz! Nem tudom mit csináltam rosszul, vmit félre nyomhattam, de ezt a regemet (link) légyszíves szüntessétek meg, mert nem tudom használni:http://www.csillagvaros.hu/index.php/kozosseg/adatlap/%C3%9Fakos%20liza
Hiába kapcsolom össze a két fiókot, nem enged belépni! :/ Így pedig felesleges a két regisztráció, és nem is tetszik, hogy kettőt látok magamból. :)

Köszönöm szépen!

Liza
Avatar
SzZoli
Hozzászólások: 1544
Csatlakozott: 2009.09.07. 10:41

Re: Működési hibák

Hozzászólás Szerző: SzZoli » 2012.11.05. 12:38

Sziasztok,

egy apró hibát vettem észre:
a viewtopic.php?f=17&t=2146
oldalon a két utolsó hsz:

Bartha Lajos (astrohist) » Ma, 23:53
Schlosser Sándor (mizar) » Tegnap, 22:06

Amikor ezt írom, ma, még csak 12:37 van :)

Ez persze nem súlyos probléma, csak jeleztem.
Porrima
Hozzászólások: 254
Csatlakozott: 2009.09.20. 20:52

Re: Működési hibák

Hozzászólás Szerző: Porrima » 2012.11.05. 13:03

SzZoli írta:Sziasztok,

egy apró hibát vettem észre:
a viewtopic.php?f=17&t=2146
oldalon a két utolsó hsz:

Bartha Lajos (astrohist) » Ma, 23:53
Schlosser Sándor (mizar) » Tegnap, 22:06

Amikor ezt írom, ma, még csak 12:37 van :)

Ez persze nem súlyos probléma, csak jeleztem.


Ezt már én is észrevettem: azt hiszem a rendszer világidőben nézi az időpontot, ezért keveri a mát a tegnappal :(
Avatar
Imre
Hozzászólások: 1799
Csatlakozott: 2010.12.29. 14:18

Re: Működési hibák

Hozzászólás Szerző: Imre » 2012.12.12. 15:21

A fórum a kezdő lap kivételével szétesett! Minden formázás hiányzik! Ez a hiba már korábban is előállt, akkor a mentés visszatöltésével sikerült csak megoldani! Teszteléshez, hibakereséshez jó a c3 validatora!
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.csillagvaros.hu%2Fforum%2Fviewtopic.php%3Ft%3D2079%26p%3D33809&charset=%28detect+automatically%29&doctype=Inline&group=0&verbose=1&user-agent=W3C_Validator%2F1.3

Üdv. Imre


http://www.csillagvaros.hu/forum/viewtopic.php?t=2079&p=33809#p33809

↑ Top
Validation Output: 9 Errors
Line 94, Column 78: required attribute "type" not specified

…src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script>



The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.
Line 95, Column 8: required attribute "type" not specified

<script> jqcc = jQuery.noConflict(true); </script>



The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.
Line 121, Column 105: there is no attribute "border"

…/lapcsalad_v2/csillagvaros/images/fejlec.jpg" alt="" title="" border="0" /></a>



You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 139, Column 56: cannot generate system identifier for general entity "view"

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>



An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".

Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&amp;" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and &aelig; are different characters.

If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.

Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 139, Column 56: general entity "view" not defined and no default entity

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>



This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 139, Column 60: reference not terminated by REFC delimiter

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>



If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 139, Column 60: reference to external entity in attribute value

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>



This is generally the sign of an ampersand that was not properly escaped for inclusion in an attribute, in a href for example. You will need to escape all instances of '&' into '&amp;'.
Line 139, Column 60: reference to entity "view" for which no system identifier could be generated

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>



This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 139, Column 55: entity was defined here

…südv, <a href="/index.php?option=com_community&view=profile&amp;Itemid=62"></a>
Line 158, Column 663: ID "current" already defined

…/a><ul><li class="active item100" id="current"><a href="/forum"><span>Fórum ke…



An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).
Line 158, Column 52: ID "current" first defined here

…="menu sf-menu sf-horizontal"><li id="current" class="parent active item62"><a…
Line 602, Column 52: there is no attribute "target"

…ref="http://hirek.csillagaszat.hu" target="_blank">Csillagászati hírek</a></h2>



You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 672, Column 17: there is no attribute "align"

<div align="center"><span style="margin-right: 20px;">Támogatók:</span> <a…



You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 711, Column 91: document type does not allow element "link" here

…text/css" rel="stylesheet" media="all" href="../cometchat/css/cometchat.css" />



The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).

One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
Ne azt sorold, hogy mit, miért nem lehet, hanem főként azt, hogy mit hogyan kell tenni a cél érdekében!
sp.
Hozzászólások: 300
Csatlakozott: 2009.09.07. 09:55

Re: Működési hibák

Hozzászólás Szerző: sp. » 2012.12.12. 21:44

...elkezdődött...22én már ilyen sem lesz... :) pedig mennyien próbálták nekünk elmagyarázni... :)
sp.
Avatar
SzZoli
Hozzászólások: 1544
Csatlakozott: 2009.09.07. 10:41

Re: Működési hibák

Hozzászólás Szerző: SzZoli » 2012.12.13. 09:59

Lám, ez a sok UFÓs hsz miatt van. Meg a világvége is alig egy hét múlva lesz. De nekem az állandóan új topicot nyitók a leggyanúsabbak :lol:
Válasz küldése

Vissza: “Hibabejelentés, fejlesztési javaslatok”